| |
RIBBED RUBBER FLOORINGS AND
RUBBER FLOORINGS WITH CIRCULAR PATTERN-STUD
|
| Rubber floorings
are technical rubber articles, purpose – for floor coverings
of vehicles, homes and public buildings.
|
| The ribbed floor coverings
are produced black or in color (all color or top- in color,
bottom – black), Hardness Shore A from 65 to 80 according to
the customer requirements. |
| Floor coverings are
SBR based and posses good resistance to diluted acids, alkalis
, salts and water. Recommended for indoor use only. |
| The floor coverings
may be produced of be oil-resistant rubber compound on customer
request. There are three qualities of oil resistant floor coverings
– with excellent, good and good to fair resistance to oil. |
Temperature range
of work /-10 äî + 70/°Ñ
1. According to the type of the ribs rubber floorings are:
- RF1/RF2 (thin)
- RF3 (medium)
- RF4 (medium big)
- RF5 (big)
Dimensions of ribbed rubber floorings are:
• Thickness, mm
- RF1/RF2
(thin) – 3.00± 0.40
- RF3
(medium) – 3.00± 0.40; 4.00± 0.40
- RF4
(medium big) – 5.00± 0.50
- RF5
(big) – 6.00± 0.50; 9.00± 0.70 • Width, mm
– from 900 to 1200
• Length, mm – from 3000 to 30 000, depending to the thickness |
 |
| The bottom with textile imprint
(cloth impression). |
2. According to the diameter
of round elements Rubber floorings with circular pattern –
stud are:
- CP-1
(big round elements) - Diameter of the elements is 25.8mm
- CP-2
(small round elements) - diameter of the elements is 15.5mm
|
| The tolerances of the dimensions
comply with ISO 3302. |
| The back side of the floorings
are with imprinted pattern of textile. |
| Store dry, protected
from direct sun-light for a period not longer of 1 year. The
floor coverings should be stored in their original packing.
|
|
| SPORTS
FLOOR COVERING "ZEBRAN" |
| Two layer rubber floor covering
for use on indoor run-up tracks or sports playgrounds. |
 |
| Rough anti-skid color surface
layer and cushioning under layer. |
| Surface layer made
of wear- and tear resistant rubber. |
Installation
Zebran can be installed on firm, hard sub-floors. The surface
to be covered must be even, clean and dust-free The flooring
is glued with two component polyurethane adhesive or by means
of solvent based glue.
After installation avoid using the floor for 48 hours. |
Specification:
Color – red or green t
Dimensions :
- thickness, mm - 12±2
- width, mm- 1200-1250
- Length of roll , m – 10±1
- Weight, kg/m2 – 20 |
| Store dry, protected
from direct sun-light for a period not longer of 1 year.. |
|
| RUBBER
FLOORINGS TYPE "MARBLE" |
Rubber floorings
type “Marble” are technical rubber articles, purpose – for floor
coverings of homes and public buildings.
|
 |
| “Marble”is produced
all black, all in color or color surface/ black bottom on customer
requiest, Hardness ShA - 76 to 86. |
| Floor coverings are
SBR based and posses good resistance to diluted acids, alkalis
, salts and water. Recommended for indoor use only. |
| Suitable for use in
the temperature range -10 - +70°Ñ. |
| The back
side of this flooring is with imprinted pattern of textile. |
Dimensions:
- Thickness, mm – 2.2 ± 0.2
- Width, mm – 900 to 1200
- Length, mm – 3000 to 20000
|
The
tolerances of the dimensions comply with ISO 3302. |
| “Marble”
may be produced with other thickness on customer request. |
| Store
dry, protected from direct sun-light for a period not longer
of 1 year. The floor coverings should be stored in their original
packing. |
