About us Products Partners Clients NewsContact us    
Rubber Compounds
Technical Rubber Sheets
Rubber Floorings
Rubberized fabrics
Wrapped V-belts
Open end flat
transmission belts
Conveyor belts
Solid rubber weight plates
for power lifting
Solid tires
Rubber-metal goods
Buffers
Protection Means
Other articles
WRAPPED V-BELTS                                                       
INQUIRY

WRAPPED V-BELTS FOR USE ON GENERAL PURPOSE DRIVES

Our wrapped V-belts are intended for troublefree application on heavy-duty industrial and agricultural drives.

Depending on their height we manufacture:
- narrow section wrapped V-belts
- classical section wrapped V-belts

Depending on their application we produce:
- V-belts for use on industrial drives
- V-belts for use on agricultural drives

Features:
- oil and heat resistant cover frictioned with neoprene rubber compound
- concave sidewalls
- arched top
- low elongation at work
- rounded bottom corners
- operating temperature range from -30oC to 60oC

NARROW CROSS SECTIONS V-BELTS
Sections Top width, mm Pitch width, mm Height, mm Lenght range, mm
SPZ 9.7 8.5 8.0 800 - 3000
SPA 12.7 11.0 10.0 750 - 3000
SPB 16.3 14.0 13.0 1350 - 4500
SPC 22.0 19.0 18.0 1900 - 6000
CONVENTIONAL CROSS SECTIONS V-BELTS
Sections Top width, mm Pitch width, mm Height, mm Lenght range, mm
T 8.0 6.7 5.0 800
Z 10 8.5 6.0 500 - 3000
A 13.0 11.0 8.0 630 - 4250
B 17.0 14.0 11.0 800 - 12000
20/12.5 20.5 17.0 12.5 1400 - 5000
C 22.0 19.0 14.0 1400 - 12500
25/16 25.0 21.0 16.0 1600 - 5350
D 32.0 27.0 19.0 2500 - 12500
E 38.0 32.0 23.5 4500 - 12500
VARIABLE SPEED WRAPPED V-BELTS
Designed for the variable transmissions in agricultural machinery, they offer an economical and convenient method of speed adjustment. We produce three cross sections which cover the requirements over a wide range loads and speeds.

Features:
- oil and heat resistant cover frictioned with neoprene rubber compound
- concave sidewalls
- arched top
- strong polyester tensile member
- undercord construccted of rubberized cord fabric oriented across the belt lenght - high lateral rigidity
- operating temperature range from -30oC to 60oC

Sections Top width, mm Pitch width, mm Thickness, mm Angle Outside Length, mm
HJ 32 29 15.1 36 1500, 2400-4200
H36x14 36 32 14 32 1175, 1320
HL 44.5 41.4 19.8 32 2400 - 4200
HM 50.8 47 22.2 32 2100, 2120, 2175, 2270, 2400-6000
JOINED V-BELTS
Conventional cross-sections A and B, or narrow cross-section 5V (15J) V-belts joined together on their top side by means of a two side rubber coated nylon tie band. The joined V-belts posess the same features as the V-belts from which they are made. Designed for use on machinery with pulsating or shock loads. They can replace multiple V-belt drives on available standard sheaves.
Sections and nominal dimensions
Sections Top width, mm Pitch width, mm Height, mm Lenght range, mm
HA - PB 13.31 10.0 8.74 1400 - 3000
HB - PB 16.61 13.4 11.12 1400 - 5000
5V - PB 15.57 13.0 14.30 2400 - 4250
   
© 2004 - 2009 Zebra AD. All rights reserved. site map | top page | index page